This article mainly introduces:

Turkey hydraulic cylinder,steel mill cylinder manufacturer,steel mill cylinder

(Turkey steel mill cylinder,produced by Hebei Hengyu company）

steel mill cylinder are widely used in Turkey，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed steel mill cylinder for customers from Turkey.

Introduction to steel mill cylinder:

Under normal circumstances, the steel mill cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the steel mill cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the steel mill cylinder and the end cover, the piston and the piston rod, the piston and the steel mill cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the steel mill cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

steel mill cylinder can not drive the load troubleshooting: oil pressure is too low. steel mill cylinder selection specifications are too small. Leakage in steel mill cylinder or associated hydraulic system element.

When the piston speed of the steel mill cylinder is high, the steel ball of the check valve flows with the oil flow, so that the valve hole is blocked, and the steel mill cylinder moves irregularly. Elimination method: Replace the steel ball with a cone valve or spool with a guide shoulder.

Repair method of small range wear of oil steel mill cylinder: 1. Use oxygen-acetylene flame to bake the scratched part (master the temperature, avoid surface annealing), bake the oil on the metal surface all the year round until no sparks splash; 2. The scratched part is treated with an Angle grinder, the grinding depth is more than 1 mm, and the groove is polished along the guide rail, preferably a dovetail groove. Scratch both ends of the drilling deeper, change the force situation; 3. Clean the surface with absorbent cotton dipped in acetone or anhydrous ethanol.

Answers to some questions about steel mill cylinder:

How to repair the bent oil cylinder correctly?
If the bending oil cylinder leaks, the most direct way is to replace the seal ring. Most of the sealing rings used by domestic bending machines are made in Taiwan and Japan, so the service life of the sealing ring is still relatively long. If the bending oil cylinder used by the customer leaks oil, then when replacing the seal ring, be sure to choose a high-quality and durable seal ring. In this way, the replaced cylinder will not leak oil for a long time.

What is the relationship between medium cylinder and side cylinder ratio of forklift truck?
The middle cylinder and the side cylinder seem to have no relationship, as long as the lifting speed required by the design can be ensured, but the diameter of the cylinder can not be too thin, so as to avoid the middle cylinder acting first when the high gantry vibration lifting, and then the two cylinders acting again.